SEA SWIRL 3/4 INCH

3/4" Model Sea Swirl       ~ NEW ~ 24 VOLT VERSION WITH AUS POWER SUPPLY

YOU HAVE A WATER RETURN INTO THE TANK----- WHY NOT OSCILLATE IT !!

 Sea Swirl Model satisfies the need for an oscillating device for large aquariums to create a broad oscillating current, not linear current like our competitors at an economical  price and it is very energy efficient too!
 
Using our customer’s request’s and needs for a higher flow product for over 4 years now, we have developed and tested l with great success.

 Two units mounted in opposite corners(front/rear) in the aquarium would cover every area of the tank with ‘’swaying’‘ motion which is seen in nature. This motion is not fast like some of the products on the market, but will produce a strong ‘’wave-crashing’‘ motion then a very calm current will follow as the Sea Swirl oscillates.
As corals grow into high current areas in the aquarium if the current is Linear the corals will tend to shed tissue and possibly even perish, grow around the linear/pulsed current or stop growing all together to avoid the straight line current. Check out the Penn State video with Dr. Sanjay Joshi on our home page! Not so with oscillating current as it is always changing from strong to calm, just like the natural current pattern in the ocean.

With our 12 years in the industry producing our smaller Sea Swirl models here in United States plus the added superior repair and customer service over this time you are assured of a quality product.
To back up this statement we are giving a 1 year warranty(supplied info card must be sent in to Aquarium Currents).....One of the BEST in the Industry compared to our competitors!

So, in closing....Since you have a return water line into the aquarium anyway, why not oscillate it and enjoy the benefits....Nature-like current produced......Economically priced, at almost half the cost of our competition!......only 3 watts of power to operate the 1.5'’ Sea Swirl...... It IS the MOST energy efficient oscillating product on the market that flows up to 5800gph!

FEATURES

Very energy efficient motor----- only 3 watts Totally NEW Design.....NO internal o-rings or seals. Straight through 1'’ pipe. Maintenance FREE—set it up and forget it Nothing to clean/soak/grease or bearings to replace. 360 degree adjustable schedule 80 inlet fitting Flow rates from 3000 to 5800gph With optional outlet creates the broadest oscillating current in the industry! Threaded outlet coupler.....NO more outlet nozzles coming off with extreme water pressure. Only needs 1-1/2'’ behind tank to install. Adjustable to your running water line by cutting the 6'’ piece of supplied black pipe or by adding a black coupler and black pipe to go deeper on closed loops. Supplied with Black ‘’sweep’‘ 90, 45, black coupler and black male adapter for inlet. Optional 2'’ sweep 90 with  black reducer bushing. Supplied black acrylic bracket works with standard glass tank frames----Perimeter Bracing or Acrylic tank cut-out areas. 1 Year Warranty—One of the best in the industry! Flows the same volume of water AND OSCILLATES 90 Degrees!     Made by hobbyist for the hobbyist 1/2" model is mounted in a 5 1/2" x 3 1/4" x 2 1/2" black plastic box & uses a 4 watt motor small 5 watt motor for 3/4" and 1" models are mounted in a 7"x 5"x 2 1/2" black plastic box 9 foot electric cord 2 viton o-rings seal around a specialty filled pipe for an extremely low coefficient of friction and giving superior lubrication!!! motor is ul listed and csa certified floating ball joint type linkage is used to connect motor shaft to oscillating pipe oscillates 90 degrees every 60 seconds 180 degree oscillating capability available on 1/2" and 3/4" models with optional "y" fitting o-rings are permanently lubricated with a synthetic teflon grease outer oscillating pipe is machined for standard schedule 40 fittings 1/2 and 3/4" models supplied with loc-line on outlet (these are adjustable up or down approx. 30 degrees) total height with fitting attached on top: 1/2 inch model - 4 1/4 inches 3/4 inch model - 4 3/4 inches 1 inch model - 5 1/4 inches flow rates for each model as follows: 1/2 inch model - 550 gph 3/4 inch model - 850 gph 1 inch model - 1150 gph

The Aquarium Currents SEA SWEEP has been selected by Reef Builders® as one of their 2012 Best Products of the Year!   Aquarium Currents is proud to introduce Two NEW exciting products... The NEW SEA SWEEP! and The NEW MULTI-SIZE SEA SWIRL!         Sea Swirl's Rotating Return Device is designed to increase circulation, health, and life of the corals and fish in your tank. Throughout this site you will find pictures of the devices, a description of our Research & Development tank, Frequently asked Questions, and many other helpful and informative things about our product!

Write a review